Duane Buziak Explains First-Time Home Buyer Mortgage Options in Hanover County, VA

A practical guide to first time home buyer mortgage options.
Virginia Mortgage Broker Duane Buziak Awards
Duane Buziak

Duane Buziak
Mortgage Maestro | NMLS #1110647 | Coast2Coast Mortgage LLC
Licensed Mortgage Broker serving Virginia, Florida, Tennessee, Georgia, and Washington, specializing in VA home loans and first-time homebuyer programs.

Suppose a first-time buyer in Hanover County, VA is looking at a $400,000 home. These are illustrative assumptions, not a quote: a 6.25% interest rate on a 30-year fixed loan, real estate tax of about $0.81 per $100 of assessed value ($270 a month), homeowners insurance of $125 a month, and $12,000 in closing costs. Here is how the program changes the numbers.

IllustrationConventional, 5% downFHA, 3.5% downVA, no down payment
Down payment$20,000$14,000$0
Base loan$380,000$386,000$400,000
Upfront fee financedNone1.75% FHA premium, $6,7552.15% VA funding fee, $8,600
Final loan amount$380,000$392,755$408,600
Principal and interest$2,340$2,418$2,516
Monthly mortgage insurance$190 (PMI)$180 (MIP)$0
Tax plus insurance$395$395$395
Total monthly payment$2,925$2,993$2,911
Cash to close (down payment plus $12,000)$32,000$26,000$12,000

The payments sit within about $80 of each other, but cash to close ranges from $12,000 to $32,000. PMI is private mortgage insurance, charged on conventional loans with less than 20% down. MIP is the FHA mortgage insurance premium. Neither the lowest down payment nor the lowest payment is automatically the right answer. Duane Buziak walks first-time buyers through each of the main mortgage options below and explains when each one fits.

1. Conventional Loans With a Low Down Payment

The belief that you need 20% down is the most common one I hear. Conventional loans, which follow Fannie Mae and Freddie Mac guidelines, allow as little as 3% down for eligible buyers. Some of these programs carry income limits, so confirm the current terms on each site.

Putting less than 20% down means paying PMI. The mechanism that makes conventional loans attractive is that PMI is removable. Under the Homeowners Protection Act, you can ask to cancel it once your balance reaches 80% of the home’s original value, and it ends automatically at 78% when you are current on payments. The CFPB explains the rules.

Here is the same $400,000 purchase at three down payment levels. The PMI figures are illustrative and depend heavily on credit score.

Illustration3% down5% down10% down
Loan amount$388,000$380,000$360,000
Principal and interest$2,389$2,340$2,217
Estimated PMI$275$190$120
Total payment with $395 tax and insurance$3,059$2,925$2,732
Cash to close$24,000$32,000$52,000

Putting 7% more down cuts the payment by roughly $330 a month but takes $28,000 more savings. Whether that trade is worth it depends on your reserves, not on a rule.

  1. Confirm the current minimums on fanniemae.com and freddiemac.com. As of its November 2025 announcement, FHFA set the 2026 baseline conforming limit at $832,750, so check the limit for your county.
  2. Run a NoTouch Credit Pull soft pull pre-approval so you see your options without a hard inquiry.
  3. Price PMI at three down payment levels, not one.
  4. Let me shop the loan across hundreds of wholesale lenders, since PMI and costs vary by lender.

The common mistake is comparing programs on principal and interest alone and ignoring PMI. Measure total monthly payment including PMI, and cash needed to close.

2. FHA Loans for Flexible Credit and Smaller Down Payments

The misconception here is that FHA is only for buyers with poor credit. FHA loans are insured by the Federal Housing Administration, so lenders can accept more flexible credit profiles, and the down payment can be 3.5% with a qualifying score. Plenty of buyers with solid credit choose FHA because the numbers fit.

The cost is the mortgage insurance structure. FHA charges an upfront premium (1.75% of the base loan, usually financed) plus an annual premium paid monthly. In the illustration above, that was $6,755 financed and $180 a month.

Now suppose a buyer with a credit score in the 640 range prices both options on that same $400,000 home. Conventional PMI at that score might run around 1.1% a year on a 5% down loan, about $348 a month. That makes the conventional total $3,083, against $2,993 for FHA. This is an illustration, and a different score or down payment can flip the result. That comparison is why you should run both.

  1. Check current FHA minimums and the Richmond-area loan limit on hud.gov.
  2. Price the upfront and annual premium on your actual loan amount.
  3. Put the FHA payment next to the conventional payment, same price and same assumptions.

The pitfall is focusing only on the down payment. On FHA loans with less than 10% down, the annual premium generally lasts for the life of the loan, whereas conventional PMI can be cancelled. Many FHA borrowers later refinance out of it, but that depends on future costs and your equity, so do not count on it. Measure monthly payment including MIP against the conventional alternative.

3. VA Loans for Eligible Veterans and Service Members

For eligible borrowers, the VA guarantee often allows no down payment and no monthly mortgage insurance. Many veterans and families in Hanover County, VA, which sits on the I-95 corridor north of Richmond, never check because they assume VA loans are hard to use. They are usually not.

Instead of monthly insurance, VA charges a one-time funding fee, usually financed. In the opening illustration it was 2.15% for a first-time VA use with no down payment, or $8,600. That produced a $2,911 payment with $12,000 cash to close, the lowest in the table. Putting 5% down lowers the fee percentage, and borrowers receiving VA disability compensation and certain surviving spouses are generally exempt. Check the current fee table on va.gov.

Suppose an eligible family compares that payment to a 5% down conventional loan. The VA path costs $14 less a month, and it needs $20,000 less cash. The conventional loan, though, builds equity faster and has no funding fee. Either could win depending on the family’s savings.

  1. Request your Certificate of Eligibility. I can usually pull it electronically on your behalf, or you can request it through va.gov.
  2. Review the funding fee for your situation, including any exemption.
  3. If you have used VA before, ask about second-tier entitlement, which can allow another VA loan while one is still open.
  4. Plan for the VA appraisal and its property requirements.

The two mistakes are assuming eligibility without checking and skipping VA because the funding fee looks like a cost. Measure cash to close and monthly payment against your right-fit non-VA option.

4. Virginia Housing Loan and Down Payment Assistance Programs

Virginia Housing, the state’s housing finance agency, offers first-mortgage loans and, in some cases, assistance with down payment or closing costs. Programs come with income limits, purchase price limits, and credit and homebuyer education requirements. All of these change, so read the current terms at virginiahousing.com rather than relying on any article, including this one.

Here is an illustration. Suppose a buyer in Mechanicsville is purchasing a $350,000 home and has saved enough for a down payment but not for closing costs. If they complete homebuyer education and qualify, assistance of $10,000 might cover most of those closing costs. Cash needed at closing drops, and the purchase becomes possible months sooner than waiting to save.

  1. Review current program terms and the income and price limits for your household size and area.
  2. Complete the required homebuyer education course before you write an offer, not after.
  3. Confirm your credit minimum against the program’s current requirement.
  4. Work with a participating lender, and ask me to confirm which path fits you.

The pitfall is ignoring the conditions attached to assistance. Some assistance is a second lien, meaning a second loan recorded behind your mortgage, and it may carry its own monthly payment or repayment on sale or refinance. Recapture rules can also apply. Read the terms before comparing, because assistance that adds a monthly payment can erase part of its benefit.

Measure cash needed at closing and the exact terms of any repayment, including what happens if you sell or refinance.

5. USDA Loans, Checked Address by Address

The USDA guarantees loans with no down payment for eligible homes and households. Eligibility turns on two things: the specific property address and your household income relative to USDA’s limits for the area. A town name tells you nothing.

Imagine a buyer searching in rural Beaverdam. Before building any plan, they enter the exact address of a home they like into the USDA eligibility map. One house is inside an eligible area; a similar house a few miles away may not be. The buyer then confirms household income against the limit, because it counts everyone in the home, not only the borrowers.

  1. Enter the exact address in the official USDA eligibility map before you fall for a house.
  2. Confirm the household income limit for your family size.
  3. Price the USDA fees, which as of recent years include an upfront guarantee fee and a smaller annual fee, and verify current amounts.
  4. Compare the total payment against conventional, FHA and VA.

The common mistake runs both ways: assuming an entire town qualifies, or assuming it does not. Properties near Mechanicsville, Ashland or Doswell may surprise you in either direction, and mapped boundaries can change. I only talk about USDA once an address is confirmed.

Measure confirmed address eligibility first, then the total monthly payment including USDA fees compared with your other options.

6. New Construction Financing for Atlee, Rutland and Beyond

Buying a to-be-built home adds a variable that resale buyers never face: your closing date belongs to the builder’s schedule. The loan has to be ready on a date that shifts with weather, permits and supply timing. That is why the lock matters. A rate lock is a promise to hold your interest cost for a set number of days. If it expires before closing, you may pay an extension fee or accept a new cost.

Suppose a buyer is under contract for a to-be-built home in Atlee with an estimated completion in about five months. A 150-day lock might look tight if builders in the area commonly run late. The better plan is to choose a lock length with real cushion, and to ask what an extension would cost before signing.

  1. Get a soft pull pre-approval before you sign a builder contract.
  2. Ask the builder for the estimated completion window and how often it moves.
  3. Choose a lock period that fits that window, and ask about extension terms.
  4. Confirm the appraisal plan, since a new home is appraised on plans and specifications and finished work.
  5. If the builder offers incentives tied to a preferred lender, request a Loan Estimate and compare it with other options.

The mistake is signing before confirming that the loan program and lock fit the closing date. Some programs, including VA and FHA, have construction requirements that a given builder may or may not handle. Measure the gap between lock expiration and the expected completion date.

7. A Soft Pull Pre-Approval Using NoTouch Credit Pull

The misconception that pre-approval hurts your credit keeps buyers from starting. A hard inquiry can lower a score by a few points, but a NoTouch Credit Pull soft pull pre-approval does not. It means no credit hit, no cost, no fees and no commitment. It is how you see which programs fit before choosing one.

Take a buyer in Ashland, near Randolph-Macon College, who starts a month before touring homes. After the soft pull, they see conventional, FHA and VA side by side at several prices and set a range based on the monthly payment they are comfortable with, not on what a calculator suggests. When the first showing arrives, they already know their shortlist.

  1. Gather recent pay stubs, tax documents and bank statements.
  2. Run the soft pull with me. I’m Duane Buziak, NMLS #1110647, and I have been helping families find their new homes since 2014.
  3. Review program options against your target price and cash available.
  4. Pick a price range and a shortlist of two programs.

Two mistakes come up repeatedly. One is treating a pre-approval as a final loan commitment: underwriting, appraisal and a full credit review still come later. The other is waiting until after you find a house, which leaves you comparing programs under deadline. Measure a clear price range and a program shortlist before the first showing.

8. Broker Versus Bank: Comparing Where Your Loan Comes From

Where your loan originates shapes the choices you see. A retail lender offers its own loan products through its own loan officers. An independent broker works for you, not for one lender: I shop your loan across hundreds of wholesale lenders. Neither model is wrong. They are different, and a first-time buyer should compare them. Structural descriptions below come from each company’s public positioning, so confirm details on their sites.

CompanyModelWhere the loan comes fromGenuine strengthConfirm
Duane BuziakIndependent mortgage brokerShopped across hundreds of wholesale lendersMany program and lender options in one applicationLoan Estimate line by line
Movement MortgageRetail lenderIts own loan products through its own loan officersBranch-based, relationship-driven servicePrograms offered, fees, lock terms
Rocket MortgageLarge retail lender with a strong online processIts own products, with a separate wholesale channel for brokersDigital experience at national scaleFees, lender credits, program fit
C&F MortgageRetail lender, subsidiary of a Virginia bank holding companyIts own productsVirginia roots and a bank-affiliated structureProgram range, cost, timeline
Southern Trust MortgageRetail lenderIts own productsEstablished Virginia-area retail presencePrograms, fees, lock terms
Sparrow Home LoansRetail lenderIts own productsFocused loan officer model for purchase buyersProgram range, fees, timeline
Lower.comRetail lender; PowerTPO is Lower, LLC’s wholesale armIts own products, plus wholesale through PowerTPOTechnology-driven processFees, credits, loan program

I have direct wholesale access, including to PowerTPO, without a retail markup. That is a structural fact, not a promise that my cost is lower. Any lender above may be the right fit for a given buyer, which is why I invite you to take my Dare to Compare challenge. Dare to Compare means you collect Loan Estimates from each option, including mine, and judge them yourself. No outcome is promised. I have 2,000+ verified reviews across all platforms, but your own comparison matters more than any review.

  1. Request a Loan Estimate, the standardized three-page form that lenders must provide, from each option. The CFPB explains how to read it.
  2. Compare costs line by line, including origination charges, third-party fees and lender credits.
  3. Check that each estimate uses the same loan program, down payment and lock period.

The common mistake is comparing only the quoted interest cost and ignoring fees, credits and program differences. A lower interest cost with higher fees can cost you more. Measure side-by-side Loan Estimates: total closing costs, monthly payment and cash to close.

Where to Start: Soft Pull First, Then the Programs That Depend on You

Begin with the NoTouch Credit Pull to learn your price range without any credit impact. Then check the programs that depend on your circumstances before defaulting to conventional or FHA: VA eligibility, Virginia Housing terms, and USDA eligibility for the exact address. Those three can lower cash to close or monthly insurance cost enough to change what you can buy in Hanover County, VA. If none applies, conventional and FHA remain strong, and the comparison in the first two strategies decides between them.

Ready to see what you qualify for in Hanover County? Duane Buziak, VA Broker of the Year 2024 & 2025 and Scotsman Guide Top Originator, runs a soft credit check first so there is no hard inquiry on your credit report. Call 804-212-8663 or Apply Now. Duane Buziak NMLS #1110647.

Share:

More Posts

Conventional Loan vs FHA: Which Fits?

Duane Buziak Explains Mortgage Refinance Options in Hanover County, VA

Duane Buziak Mortgage Maestro, NMLS #1110647, explains mortgage refinance options for Hanover County, VA homeowners, starting with a worked $300,000 example comparing 7.0% and 6.0% payments. The guide matches each goal, whether a lower payment, shorter term, cash, or dropping mortgage insurance, to the refinance type and the cost test that shows whether it pays off in 2026.

Send Us A Message